Presentation
6 March 2023 Photonic crystal multimode fiber-tip sensors
Author Affiliations +
Abstract
Fiber-tip sensors have been used extensively for measuring chemical and physical parameters. Particularly, multimode fibers (MMF) tip sensors have become attractive since they open the possibility of using simple light-emitting diodes. While common techniques to fabricate MM fiber-tip sensors are labor-intensive, we developed a simple and controllable method to transfer large-area nanophotonic structures to the fiber end-face by mechanical contact, without using glue or micromanipulator. As proof of concept, a 2D photonic crystal (PhC) was successfully transferred to the tip of a multimode fiber, and its response to changes in refractive index was characterized, obtaining a sensitivity of 244 nm/RIU.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mildred S. Cano-Velázquez, Luca Picelli, Arnoud Loopstra, Omar Abdel-Aal, Arthur L. Hendriks, René P. J. van Veldhoven, and Andrea Fiore "Photonic crystal multimode fiber-tip sensors", Proc. SPIE PC12372, Optical Fibers and Sensors for Medical Diagnostics, Treatment and Environmental Applications XXIII, PC1237202 (6 March 2023); https://doi.org/10.1117/12.2649085
Advertisement
Advertisement
KEYWORDS
Sensors

Fiber optics sensors

Multimode fibers

Photonic crystals

Fabrication

Single mode fibers

Fiber lasers

Back to Top