Presentation
3 November 2016 Research of vacuum polymer film on three-dimension surface (Conference Presentation)
Author Affiliations +
Abstract
This study focused on UV-curable acrylic hybrid of solute in vacuum-deposited on the surface and make it smooth. On the surface coating of the entire process, including the pre-treatment of organic solutes, vacuum, nozzle pressure, airflow, frequency ratio, the surface of the rotation rate, nozzle angle, UV light irradiation time, waste solute recycling.Organic solutes through a flow meter and precise measured,by high pressure or vibration of a piezoelectric material, spray our organic solute in a certain degree of vacuum,leaving nozzle of tiny micro-mist volatiles in a vacuum to form secondary atomization,deposited our surface,Since no UV light irradiation, the surface is a liquid having fluidity, so the non-planar substrates can have good performance, finally it is irradiated by UV light of sufficient energy solidify to form a solid film.The advantage of this approach is that a smooth surface,Strong adhesion, low-cost equipment, low temperature, a wide range of high deposition rate can be combined with other deposition method,Under vacuum have not waste because excess paint can be recycled.Avoid solute direct contact with human, relative to the environment-friendly.
Conference Presentation
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yung-Han Bau "Research of vacuum polymer film on three-dimension surface (Conference Presentation)", Proc. SPIE 9927, Nanoengineering: Fabrication, Properties, Optics, and Devices XIII, 99270T (3 November 2016); https://doi.org/10.1117/12.2237175
Advertisement
Advertisement
KEYWORDS
Natural surfaces

Ultraviolet radiation

Polymer thin films

Polymers

Solids

Coating

Environmental sensing

Back to Top