Design and realization of beam collimation system for semiconductor laser in atomic magnetometer

Xi Chen; Wei Quan; Lihong Duan; Baiqi Liu; Fan Xu

doi:10.1117/12.2199783

15 October 2015 Design and realization of beam collimation system for semiconductor laser in atomic magnetometer

Xi Chen, Wei Quan, Lihong Duan, Baiqi Liu, Fan Xu

Proceedings Volume 9671, AOPC 2015: Advances in Laser Technology and Applications; 967114 (2015) https://doi.org/10.1117/12.2199783
Event: Applied Optics and Photonics China (AOPC2015), 2015, Beijing, China

Abstract

Atomic magnetometer which uses alkali atoms as the sensors can realize ultrahigh sensitivity magnetic field measurement and has extensive applications scientific researches. Semiconductor lasers are used as the pump and probe laser in atomic magnetometer. Due to structural characteristics of semiconductor laser, beam divergence angles in vertical and horizontal direction have large deviation and laser beam diverges extremely fast. However, poor laser beam affects the implementation of atomic magnetometer sensitivity adversely. Only the circular laser beam with Gaussian distribution guarantees the homogeneous polarization of alkali atom vapor and high efficiency of atomic magnetometer. Consequently, a beam collimation system must be designed. In this paper, a collimation method using a thin lens and a pair of anamorphic prisms is proposed to guarantee the laser spot size approximately constant. The thin lens is used to decrease fast-axis divergence angle and ensure transmitted light is parallel. The anamorphic prisms pairs expand the laser beam in slow-axis and make the beam spot nearly round. Initially, the effect of thin lenses and anamorphic prisms on the relationship of input and output beam profiles is theoretically analyzed based on principle of geometrical optics. Then the software Zemax is used to simulate the collimation system. Finally, a beam collimation system is designed and tested. The experiment result shows that the laser beam size is approximately 2×2cm² and the beam approximate a Gaussian profile, which can meet the requirement of the atomic magnetometer.

Citation Download Citation

Xi Chen, Wei Quan, Lihong Duan, Baiqi Liu, and Fan Xu "Design and realization of beam collimation system for semiconductor laser in atomic magnetometer", Proc. SPIE 9671, AOPC 2015: Advances in Laser Technology and Applications, 967114 (15 October 2015); https://doi.org/10.1117/12.2199783

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available