The relationship between polymer waveguide optical interconnection end facet roughness and the optical input and output coupling losses

Hadi Baghsiahi; Kai Wang; Richard Pitwon; David R. Selviah

doi:10.1117/12.2079571

20 April 2015 The relationship between polymer waveguide optical interconnection end facet roughness and the optical input and output coupling losses

Hadi Baghsiahi, Kai Wang, Richard Pitwon, David R. Selviah

Author Affiliations +

Proceedings Volume 9360, Organic Photonic Materials and Devices XVII; 93600O (2015) https://doi.org/10.1117/12.2079571
Event: SPIE OPTO, 2015, San Francisco, California, United States

Abstract

The RMS surface roughness of an optical polymer waveguide end facet cut by a milling router and measured by AFM is investigated for a range of rotation speeds and translation speeds of the router. It was found that 1 flute (cutting edge) routers gave significantly less rough surfaces than 2 or 3 flute routers. The best results were achieved for a 1 flute router when the milling bit was inserted from the copper layer side of the board with a rotation speed of 15,000 rpm and a translation speed of 0.25 m/min which minimized the waveguide core end facet RMS roughness to 183 ± 8 nm and gave input optical coupling loss of 1.7 dB ± 0.5 dB and output optical coupling loss of 2.0 dB ± 0.7 dB. The relationship between optical coupling loss at the input and output of the waveguides and waveguide end facet roughness is also investigated in this paper. The ratio of RMS roughness to autocorrelation length of the roughness is shown to have a quantified linear relationship with experimental measurements of optical insertion loss, input optical coupling loss and output optical coupling loss. A new fabrication technique for cut waveguide end facet treatment has been proposed and demonstrated which reduces the insertion loss by 2.60 dB ± 1.3 dB which is more than that achieved by the closest available index matching fluid which gave 2.23 dB ± 1.2 dB and which is far more robust for use in commercial products.

Citation Download Citation

Hadi Baghsiahi, Kai Wang, Richard Pitwon, and David R. Selviah "The relationship between polymer waveguide optical interconnection end facet roughness and the optical input and output coupling losses", Proc. SPIE 9360, Organic Photonic Materials and Devices XVII, 93600O (20 April 2015); https://doi.org/10.1117/12.2079571

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available