|
1.INTRODUCTIONAs seen in Fig. 1, the Laser Propagation Demonstration (LPD) is setup to interactively display the optical effects associated with coherent light propagation through atmospheric turbulence1,2. For this purpose, a green laser diode is set on the front end of a meter long optical rail. The laser beam from the green laser diode is then sent through various optical components placed along the optical rail to better highlight the optical effects that manifest from a rotating turbulence phase screen. After, the laser light meets a beam sampler set at a 45 degree angle. Approximately 95% of the laser light is transmitted through the beam sampler and is then projected onto a screen set on the back end of the optical rail. The reflected light from the beam sampler is then imaged onto a camera located on the back end of a separate optical rail also oriented at a 45 degree angle. This allows for the laser light to be seen on a laptop screen in addition to a projector when available. Use of the optical rails allows for easy transportation and table-top setup of the LPD. It also provides added versatility in the fact that the demonstration builds on itself in a fun hands-on way. As such, the LPD is appropriate for both large and small crowds. With smaller crowds, a one-on-one approach is used. The interested student is able to adjust the various optical components themselves placed along the optical rail with the help of an Air Force Institute of Technology (AFIT) SPIE Student Chapter member. With a larger crowd, the various concepts are taught by an AFIT SPIE Student Chapter member. In either setting, accompanying handouts and posters boards allow for the audience to follow along with the explanations and ask questions to stimulate involvement at all levels. The LPD has the ability to appeal to a diverse crowd of inquisitive learners. Section two of this paper provides an overview of the LPD’s development. Here, the reader gets to visually see the LPD in action at various outreach events. Section three provides an overview of LPD’s design and makes reference to a parts/price list located in the Appendix of this paper. Using this parts/price list, the interested reader can build their very own LPD! Section four then provides a conclusion for this paper with a roadmap for future upgrades that are currently in the mix. 2.OVERVIEW OF THE LPD’S DEVELOPMENTThe LPD initially came into existence thanks to a LaserFest grant awarded by SPIE in 2010 for approximately $650. Ongoing research at AFIT in directed energy3,4,5 and space situational awareness6,7,8 served as the inspiration for the LPD’s design. As shown in Fig. 2, associated with this ongoing research is the idea that coherent light from a laser has to propagate through the atmosphere, which leads to multiple engineering constraints when dealing with military applications. With this in mind, the AFIT SPIE Student Chapter wanted to develop a way to demonstrate the optical effects of atmospheric turbulence on coherent light propagation1,2. Attendance at the 2010 Adaptive Optics Summer School (put on by the Center for Adaptive Optics at the University of California Santa Cruz) presented a clever way to simulate atmospheric turbulence in the laboratory9. Using this idea, the LPD’s initial design was made part of a LaserFest lecture series held by AFIT (fall 2010), as seen in Fig. 3. Two distinguished researchers, Dr. Verdeyen10 and Dr. Hogge11, served as guest speakers. As required by the LaserFest grant, the SPIE Student Chapter developed handouts and poster boards to accompany the LPD (also seen in Fig. 3). Figures 4 and 5 give a more detailed view of the developed handouts, which are still in use to this day. Note that these handouts help to explain the underlying physics, experimental design, and military applications associated with the LPD. In an effort to make the LPD more interactive and portable, it went through several design upgrades. As seen in Figs. 6 and 7, these design upgrades made an appearance at a multitude of outreach events around the Dayton, Ohio area. These outreach events include: Rosa Parks Middle School, the Boonshoft Museum, the AFIT campus, the 2013 TechFest at Sinclair Community College, the 2013 Junior Science and Humanities Symposium, and St. Xavier High School (to name a few). The LPD was also displayed at the 2011, 2012, and 2013 SPIE Optics Outreach Olympics/Games, as seen in Fig. 8. In 2011 and 2012 the LPD received third place bronze medals and in 2013 an honorable mention. The reader should also note that the AFIT SPIE Student Chapter currently owns all of the LPD’s parts outright thanks to continued support from a 2012 SPIE Education Outreach Grant for approximately $2500. We greatly appreciate SPIE’s support! 3.OVERVIEW OF THE LPD’S DESIGNThe LPD is a tried and true optics and photonics demonstration, and the AFIT SPIE Student Chapter hopes to share what we have learned through its development. The Appendix contains a parts/price list for all of the LPD’s components. Assuming, that you have access to an optics lab with the various tools required for assembly, you can build a similar upgraded demonstration for around $3300; however, a basic design can also be constructed for less than $2000! Figure 9 below shows a description for both designs, which primarily use optical components from Thorlabs. The only custom parts included in the LPD’s design are the turbulence phase screen and the amplitude masks, as shown in Fig. 10. Both the turbulence phase screen and the amplitude masks are easy to make in practice. For example, to make the turbulence phase screen, the interested reader should use a clear cd that comes on the top or bottom of a stack of blank cds. Proceed to lightly coat it with hair spray or clear acrylic spray paint9,12. This causes changes in the index of refraction which distorts the phase of the incident laser light. Upon propagation, this gives rise to constructive and destructive interference, also known as scintillation, and distortion upon imaging1,2. In addition, to make the amplitude masks, simply print the examples provided in Fig. 10 on clear transparencies or design your own using Microsoft PowerPoint. It’s that easy! 4.CONCLUSIONThis paper reviews the success of the LPD—AFIT’s legacy outreach effort in optics and photonics. It is our hope that the interested reader can improve our design and share it with the STEM-based outreach community. The SPIE Student Chapter at AFIT plans to continually upgrade the LPD as well. In the near future, we plan to finish building robust carrying cases so that transportation of the LPD is even easier! With that said, if you have questions, please do not hesitate to ask—you may contact the first author via the info given above. The views expressed in this paper are those of the authors and do not reflect the official policy or position of the U.S. Air Force, Department of Defense, or the U.S. government. REFERENCESAndrews, L. C., Field Guide to Atmospheric Optics, SPIE Press(2004). https://doi.org/10.1117/3.549260 Google Scholar
Tyson, R. K., Frazier, B. W., Field Guide to Adaptive Optics, 2SPIE Press(2012). https://doi.org/10.1117/3.923078 Google Scholar
Spencer, M. F., Cusumano, S. J., Schmidt, J. D., and Fiorino, S. T.,
“Impact of spatial resolution on thermal blooming phase compensation instability,”
in Proc. SPIE,
781609
(2010). Google Scholar
Spencer, M. F., Cusumano, S. J.,
“Impact of branch points in adaptive optics compensation of thermal blooming and turbulence,”
in Proc. SPIE,
816503
(2011). Google Scholar
Perram, G. P., Cusumano, S. J., Hengehold, R. L., and Fiorino, S. T., Introduction to Laser Weapon Systems, Directed Energy Professional Society(2010). Google Scholar
Pellizzari, C., Spencer, M., Steinhoff, N., Belsher, J., Tyler, G., Williams, S., and Williams, S.,
“Inverese synthetic aperture ladar: a high-fidelity modeling and simulation tool,”
in Proc. SPIE,
88770B
(2013). Google Scholar
Pellizzari, C. J., Spencer, M. F., Calef, B., Bos, J., Senft, D. C., William, S., and Williams, S. E.,
“Performance characterization of Phase Gradient Autofocus for inverse synthetic aperture LADAR,”
in Proc. IEEE,
1
–11
(2014). Google Scholar
Schmidt, J. D., Numerical Simulation of Optical Wave Propagation with Example in MATLAB, SPIE Press(2010). Google Scholar
Rampy, R., Gavel, D., Dillon, D., and Thomas, S.,
“Production of phase screens for simulation of atmospheric turbulence,”
App. Opt51, 8769
–8778
(2012). https://doi.org/10.1364/AO.51.008769 Google Scholar
Verdeyen, J. T., Laser Electronics, 3Prentice Hall(1995). Google Scholar
Hogge, C. B., and Butts, R. R.,
“Effects of using different wavelengths in wave-front sensing and correction,”
J. Opt. Soc. Am72, 606
–609
(1982). https://doi.org/10.1364/JOSA.72.000606 Google Scholar
Note that overspray works best to lightly coat the clear cd,
“The goal is to make phase screen not a diffuser,”
Google Scholar
|