Paper
2 June 2014 Multi-wavelength erbium fiber ring laser with optical feedback for temperature measurements
Author Affiliations +
Proceedings Volume 9157, 23rd International Conference on Optical Fibre Sensors; 91575Y (2014) https://doi.org/10.1117/12.2059174
Event: OFS2014 23rd International Conference on Optical Fiber Sensors, 2014, Santander, Spain
Abstract
In this work, a new configuration of a multi-wavelength erbium fiber ring laser is proposed and demonstrated experimentally by introducing a feedback fiber loop in a fiber ring cavity. Four-wavelength laser emission lines were obtained simultaneously in single-longitudinal mode operation showing a power instability lower than 0.56 dB, and an optical signal-to-noise ratio higher than 50 dB for all the emitted wavelengths. The sensing capability of the FBGs gives this source the possibility to be also used as sensor-network multiplexing scheme. The system offers a better stability and higher optical signal to noise ratios than similar configurations.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Diaz, D. Leandro, and M. Lopez-Amo "Multi-wavelength erbium fiber ring laser with optical feedback for temperature measurements", Proc. SPIE 9157, 23rd International Conference on Optical Fibre Sensors, 91575Y (2 June 2014); https://doi.org/10.1117/12.2059174
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Fiber Bragg gratings

Laser optics

Feedback loops

Erbium

Spatial light modulators

Erbium lasers

Back to Top