Paper
21 July 2014 Opto-mechanical design of ShaneAO: the adaptive optics system for the 3-meter Shane Telescope
C. Ratliff, J. Cabak, D. Gavel, R. Kupke, D. Dillon, E. Gates, W. Deich, J. Ward, D. Cowley, T. Pfister, M. Saylor
Author Affiliations +
Abstract
A Cassegrain mounted adaptive optics instrument presents unique challenges for opto-mechanical design. The flexure and temperature tolerances for stability are tighter than those of seeing limited instruments. This criteria requires particular attention to material properties and mounting techniques. This paper addresses the mechanical designs developed to meet the optical functional requirements. One of the key considerations was to have gravitational deformations, which vary with telescope orientation, stay within the optical error budget, or ensure that we can compensate with a steering mirror by maintaining predictable elastic behavior. Here we look at several cases where deformation is predicted with finite element analysis and Hertzian deformation analysis and also tested. Techniques used to address thermal deformation compensation without the use of low CTE materials will also be discussed.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Ratliff, J. Cabak, D. Gavel, R. Kupke, D. Dillon, E. Gates, W. Deich, J. Ward, D. Cowley, T. Pfister, and M. Saylor "Opto-mechanical design of ShaneAO: the adaptive optics system for the 3-meter Shane Telescope", Proc. SPIE 9148, Adaptive Optics Systems IV, 91483B (21 July 2014); https://doi.org/10.1117/12.2057064
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Adaptive optics

Telescopes

Wavefront sensors

Cameras

Microelectromechanical systems

Aluminum

Optical benches

RELATED CONTENT

KAPAO a MEMS based natural guide star adaptive optics...
Proceedings of SPIE (March 05 2013)
ViLLaGEs opto mechanical design of an on sky visible...
Proceedings of SPIE (July 23 2008)
The 2012 status of the MCAO testbed for the GREGOR...
Proceedings of SPIE (September 13 2012)
Performance of a MEMS reflective wavefront sensor
Proceedings of SPIE (February 08 2008)
Open-loop performance of a MEMS reflective wavefront sensor
Proceedings of SPIE (September 27 2007)
High-contrast imaging testbed
Proceedings of SPIE (February 08 2008)

Back to Top