Paper
31 January 2014 Design, fabrication, and characterization of InSb avalanche photodiode
J. Abautret, A. Evirgen, J. P. Perez, P. Christol, A. Rouvié, R. Cluzel, A. Cordat, J. Rothman
Author Affiliations +
Abstract
In this communication, the potentiality of InSb material as an avalanche photodiode (APD) device is investigated. Current density-voltage (J-V) characteristics at 77K of InSb pin photodiodes were simulated by using ATLAS software from SILVACO, in dark conditions and under illumination. In order to validate parameter values used for the modeling, theoretical J-V results were compared with experimental measurements performed on InSb diodes fabricated by molecular beam epitaxy. Next, assuming a multiplication process only induced by the electrons (e-APD), different designs of separate absorption and multiplication (SAM) APD structure were theoretically investigated and the first InSb SAM APD structure with 1μm thick multiplication layer was then fabricated and characterized.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Abautret, A. Evirgen, J. P. Perez, P. Christol, A. Rouvié, R. Cluzel, A. Cordat, and J. Rothman "Design, fabrication, and characterization of InSb avalanche photodiode", Proc. SPIE 8993, Quantum Sensing and Nanophotonic Devices XI, 899314 (31 January 2014); https://doi.org/10.1117/12.2039011
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Avalanche photodetectors

Doping

Absorption

Electrons

Avalanche photodiodes

Diodes

Photodiodes

Back to Top