Paper
6 March 2014 Fs-laser microstructuring of laser-printed LiMn2O4 electrodes for manufacturing of 3D microbatteries
Author Affiliations +
Abstract
Lithium manganese oxide composite cathodes are realized by laser-printing. The printed cathode is a composite and consists of active powder, binder and conductive agents. Laser-printed cathodes are first calendered and then laser structured using femtosecond-laser radiation in order to form three-dimensional (3D) micro-grids in the cathode material. Three-dimensional micro-grids in calendered/laser structured cathodes exhibit improved discharge capacity retention at a 1 C discharging rate. Calendered but unstructured cathodes indicate the poorest cycling behavior at 1 C discharge. The improved capacity retention and the reduced degradation of calendered/structured cathodes can be attributed to both the increased electrical contact through calendering as well as shortened Li-ion pathways due to laser-induced 3D microgrids.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Pröll, H. Kim, M. Mangang, H. J. Seifert, A. Piqué, and W. Pfleging "Fs-laser microstructuring of laser-printed LiMn2O4 electrodes for manufacturing of 3D microbatteries", Proc. SPIE 8968, Laser-based Micro- and Nanoprocessing VIII, 896805 (6 March 2014); https://doi.org/10.1117/12.2039902
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Composites

3D microstructuring

Particles

Carbon

Laser processing

Lithium

Back to Top