Enhanced photovoltaic performance of dye-sensitized solar cell using composite photoanode on 3D electrode

Chiew Keat Lim; Hui Huang; Man Siu Tse; Ooi Kiang Tan

doi:10.1117/12.2033301

7 December 2013 Enhanced photovoltaic performance of dye-sensitized solar cell using composite photoanode on 3D electrode

Chiew Keat Lim, Hui Huang, Man Siu Tse, Ooi Kiang Tan

Author Affiliations +

Proceedings Volume 8923, Micro/Nano Materials, Devices, and Systems; 892307 (2013) https://doi.org/10.1117/12.2033301
Event: SPIE Micro+Nano Materials, Devices, and Applications, 2013, Melbourne, Victoria, Australia

Abstract

For dye-sensitized solar cell (DSSC), an efficient transport of electron from the dye sensitizer through the mesoporous oxide layer and to be collected by electrode is crucial for high photovoltaic conversion efficiency. In this work, two novel approaches were developed in DSSC fabrication to improve the overall photovoltaic performance. The concurrent improvement in the charge transport property and light harvesting efficiency was achieved by incorporating N-doped TiO₂ in the mesoporous TiO2 layer of the photoanode. These N-doped TiO₂ (TiN_xO_y) was formed by using the single step thermal oxidation of Titanium Nitride (TiN) nanomaterials. At the same time, the 3D electrode with SnO₂ nanorods grown on the FTO glass using plasma enhanced chemical vapor deposition (PECVD) system was used to enhance the charge collection efficiency. By combining these two approaches simultaneously, the DSSC with composite TiN_xO_y-TiO₂ photoanode on SnO₂ nanorods 3D electrode was successfully fabricated and characterized. As compared to the standard DSSC, an overall increment of 28 % in the conversion efficiency was achieved. Higher incident photon-current conversion efficiency (IPCE) values were also obtained, specifically for the region 400 – 500 nm due to the cosensitization effect of N-doped TiO_2.Efficient transfer of electron due to the decrease in charge transfer resistance at the mesoporous oxide/dye/electrolyte interface was observed from electrochemical impedance spectroscopy (EIS) measurement. With the use of SnO₂ nanorods, the adhesion between the mesoporous TiO_2/FTO was enhanced and the transit time of a photogenerated electron through the mesoporous layer before being collected at the FTO electrode was significantly reduced by 50 %.

Citation Download Citation

Chiew Keat Lim, Hui Huang, Man Siu Tse, and Ooi Kiang Tan "Enhanced photovoltaic performance of dye-sensitized solar cell using composite photoanode on 3D electrode", Proc. SPIE 8923, Micro/Nano Materials, Devices, and Systems, 892307 (7 December 2013); https://doi.org/10.1117/12.2033301

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available