Manufacturing and optical testing of 800 mm lightweight all C/SiC optics

Hidehiro Kaneda; Masataka Naitoh; Takao Nakagawa; Tadashi Imai; Haruyoshi Katayama; Masahiro Suganuma; Yoshio Tange; Ryota Sato; Keigo Enya; Masaki Kotani; Kenta Maruyama; Takashi Onaka; Takuma Kokusho

doi:10.1117/12.2025259

30 September 2013 Manufacturing and optical testing of 800 mm lightweight all C/SiC optics

Hidehiro Kaneda, Masataka Naitoh, Takao Nakagawa, Tadashi Imai, Haruyoshi Katayama, Masahiro Suganuma, Yoshio Tange, Ryota Sato, Keigo Enya, Masaki Kotani, Kenta Maruyama, Takashi Onaka, Takuma Kokusho

Author Affiliations +

Proceedings Volume 8837, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems; 88370I (2013) https://doi.org/10.1117/12.2025259
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

Owing to its high specific stiffness and high thermal stability, silicon carbide is one of the materials most suitable for large space-borne optics. Technologies for accurate optical measurements of large optics in the vacuum or cryogenic conditions are also indispensable. Within the framework of the large SiC mirror study program led by JAXA, we manufactured an 800-mm-diameter lightweight telescope, all of which is made of HB-Cesic, a new type of carbon-fiber-reinforced silicon carbide (C/SiC) material developed jointly by ECM, Germany and MELCO, Japan. We first fabricated an 800-mm HB-Cesic primary mirror, and measured the cryogenic deformation of the mirror mounted on an HB-Cesic optical bench in a liquid-helium chamber. We observed the cryo-deformation of 110 nm RMS at 18 K with neither appreciable distortion associated with the mirror support nor significant residual deformation after cooling. We then integrated the primary mirror and a high-order aspheric secondary mirror into a telescope. To evaluate its optical performance, we established a measurement system, which consists of an interferometer in a pressure vessel mounted on a 5-axis adjustable stage, a 900-mm auto-collimating flat mirror, and a flat mirror stand with mechanisms of 2-axis tilt adjustment and rotation with respect to the telescope optical axis. We installed the telescope with the measurement system into the JAXA 6-m chamber and tested them at a vacuum pressure to verify that the system has a sufficiently high tolerance against vibrations in the chamber environment. Finally we conducted a preliminary study of sub-aperture stitching interferometry, which is needed for telescopes of our target missions in this study, by replacing the 900-mm flat mirror with a rotating 300-mm flat mirror.

Citation Download Citation

Hidehiro Kaneda, Masataka Naitoh, Takao Nakagawa, Tadashi Imai, Haruyoshi Katayama, Masahiro Suganuma, Yoshio Tange, Ryota Sato, Keigo Enya, Masaki Kotani, Kenta Maruyama, Takashi Onaka, and Takuma Kokusho "Manufacturing and optical testing of 800 mm lightweight all C/SiC optics", Proc. SPIE 8837, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems, 88370I (30 September 2013); https://doi.org/10.1117/12.2025259

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available