Paper
18 September 2013 High sensitive FBG pressure sensor using metal bellows
Author Affiliations +
Abstract
A fiber-optic sensor scheme, capable of the simultaneous measurement of pressure and temperature using two in-line Fiber Bragg Gratings (FBGs) is reported. Sensor head is configured by embedding the two FBGs with metal bellows, such that FBG1 is sensitive to both pressure and temperature, whereas FBG2 is only sensitive to temperature. High pressure sensitivity is achieved because of the lower spring rate in longitudinal direction to that of the large elastic modulus in transverse direction of the metal bellows. Pressure and temperature measurement is made by monitoring the shift of Bragg wavelengths of the FBGs corresponds to variation in pressure and temperature. From the test results, the obtained pressure and temperature sensitivities are 86 pm/psi and 9.17 pm/°C, over a dynamic range of 0-40 psi pressure, and 25-110°C temperature measurements respectively. The experimental results well agreed with the theoretical results and show good linearity. This simple design, economical and all fiber optic sensors can be used for liquid and gas pressure measurements, and under-water applications.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. Vengal Rao, K. Srimannarayana, M. Sai Shankar, and P. Kishore "High sensitive FBG pressure sensor using metal bellows", Proc. SPIE 8836, Optomechanical Engineering 2013, 88360D (18 September 2013); https://doi.org/10.1117/12.2024262
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Temperature metrology

Sensors

Metals

Fiber optics sensors

Head

Optical fibers

Back to Top