Studies of texture in nuclear graphites using laser ultrasonic line source measurements

James B. Spicer; Lindsey R. Lindamood

doi:10.1117/12.2009774

17 April 2013 Studies of texture in nuclear graphites using laser ultrasonic line source measurements

Proceedings Volume 8695, Health Monitoring of Structural and Biological Systems 2013; 86952B (2013) https://doi.org/10.1117/12.2009774
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2013, San Diego, California, United States

Abstract

Laser ultrasonic line sources have been used to study the ultrasonic properties of nuclear graphites. These materials exhibit varying degrees of porosity and texture that relate directly to the conditions imposed during material processing-extruded materials display significant texture while the anisotropy of molded materials is significantly lower. Both the texture (related to grain orientation) and porosity impact the long term performance of graphite under service conditions and methods are needed to assess the microstructural states of these materials during service. Laser ultrasonic measurements can be used to assess aspects of material microstructure by measuring longitudinal and shear wavespeeds as a function of propagation direction and polarization. While porosity-related effects are independent of propagation direction for materials with spherical pores, material texture (related to preferred grain orientation) produces anisotropic wave propagation effects. In particular, propagation perpendicular to extrusion directions can produce shear wave birefringence effects that can be used to assess texture. Ultrasonic measurements in this work were made using laser ultrasonic methods that yield waveforms that can be interpreted using elastodynamic models for wave propagation in anisotropic materials. In particular, models for laser ultrasonic line sources in transversely isotropic materials have been used to simulate laser sources in nuclear graphites. The effects of optical penetration (related to material porosity) have been incorporated to produce synthetic waveforms that can be used to extract modulus information from experimental measurements. Current results hold open the opportunity for porosity and texture assessment using limited sets of ultrasonic measurements.

Citation Download Citation

James B. Spicer and Lindsey R. Lindamood "Studies of texture in nuclear graphites using laser ultrasonic line source measurements", Proc. SPIE 8695, Health Monitoring of Structural and Biological Systems 2013, 86952B (17 April 2013); https://doi.org/10.1117/12.2009774

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available