Paper
8 June 1988 Selective Photobleaching Of Steady-State Gamma Irradiated Silica Fibers Application To The Hardening Of A Digital Optical Link
Gerard Breuze, Jean Serre, Alain Friant
Author Affiliations +
Proceedings Volume 0867, Optical Devices in Adverse Environments; (1988) https://doi.org/10.1117/12.965060
Event: 1987 Symposium on the Technologies for Optoelectronics, 1987, Cannes, France
Abstract
Photobleaching at 340 and 1300 nm wavelengths of three multimode silica fibers under steady-state gamma irradiation (2 x 480 Gy, 120 Gy/h) at room temperature was studied as regards induced loss and recovery kinetics. Significant differences in behaviour between two pure silica-core fibers (plastic clad QSF 200 A and fluorine doped-clad AS 200 -300 from Quartz et Silice) and a germanium doped-core fiber 7020/250 from Compagnie Lyonnaise de Transmissions Optiques are presented. The hardening up to 0.1 MGy of a short bidirectional data link designed to operate a servomanipulator in a hot cell is described as an example of application.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gerard Breuze, Jean Serre, and Alain Friant "Selective Photobleaching Of Steady-State Gamma Irradiated Silica Fibers Application To The Hardening Of A Digital Optical Link", Proc. SPIE 0867, Optical Devices in Adverse Environments, (8 June 1988); https://doi.org/10.1117/12.965060
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Silica

Light emitting diodes

Signal attenuation

Interfaces

Optical components

Light sources

RELATED CONTENT

The aging process of optical couplers by gamma irradiation
Proceedings of SPIE (August 26 2015)
Novel plastic image-transmitting fiber
Proceedings of SPIE (December 01 1991)
Fiber Optic Protected Distribution System
Proceedings of SPIE (March 22 1983)

Back to Top