Paper
4 March 2013 Growth of high indium InGaN films using a combined deposition technique and its application for long wavelength emitter
Author Affiliations +
Abstract
High indium content InGaN films were grown on sapphire substrate using low temperature pulsed laser deposition (PLD) with nitrogen plasma and a specific target. The controllable target consists of two separate sections: an indium sheet with periodic rectangular-holes and a standard GaN wafer. By changing the rectangular-hole area, a modulated indium vapor was excited by pulsed laser and introduced into the InGaN deposition reaction, contributing the increase in the incorporation of indium into the InGaN film. The structural and optical stability of the 33 and 60% indium InGaN revealed no differences in the line-shape and peak position even after annealing at 800°C for 75 min from x-ray diffraction and luminescence results. Moreover, such high thermal stability of 60% InGaN film was put in metal organic chemical vapor deposition (MOCVD) to regrow GaN layer, the peak position of 860 nm remained unchanged after MOCVD regrowth. The flat and uniform of regrown sample indicates that the PLD method used in this study is indeed promising for the development long wavelength of high indium content InGaN emitters.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kun-Ching Shen, Ming-Chien Jiang, Tzu-Yu Wang, Ray-Hua Horng, and Dong-Sing Wuu "Growth of high indium InGaN films using a combined deposition technique and its application for long wavelength emitter", Proc. SPIE 8641, Light-Emitting Diodes: Materials, Devices, and Applications for Solid State Lighting XVII, 864118 (4 March 2013); https://doi.org/10.1117/12.2003725
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Indium

Indium gallium nitride

Gallium nitride

Annealing

Indium nitride

Metalorganic chemical vapor deposition

Light emitting diodes

Back to Top