Deep silicon etch for biology MEMS fabrication: review of process parameters influence versus chip design

T. Magis; S. Ballerand; A. Bellemin Comte; Olivier Pollet

doi:10.1117/12.2003765

9 March 2013 Deep silicon etch for biology MEMS fabrication: review of process parameters influence versus chip design

T. Magis, S. Ballerand, A. Bellemin Comte, Olivier Pollet

Proceedings Volume 8612, Micromachining and Microfabrication Process Technology XVIII; 86120A (2013) https://doi.org/10.1117/12.2003765
Event: SPIE MOEMS-MEMS, 2013, San Francisco, California, United States

Abstract

Micro-system for biology is a growing market, especially for micro-fluidic applications (environment and health). Key part for the manufacturing of biology MEMS is the deep silicon etching by plasma to create microstructures. Usual etching process as an alternation of etching and passivation steps is a well-known method for MEMS fabrication, nowadays used in high volume production for devices like sensors and actuators. MEMS for biology applications are very different in design compared to more common micro-systems like accelerometers for instance. Indeed, their design includes on the same chip structures of very diverse size like narrow pillars, large trenches and wide cavities. This makes biology MEMS fabrication very challenging for DRIE, since each type of feature considered individually would require a specific etch process. Furthermore process parameters suited to match specifications on small size features (vertical profile, low sidewall roughness) induce issues and defects on bigger structures (undercut, micro-masking) and vice versa. Thus the process window is constrained leading to trade-offs in process development. In this paper process parameters such as source and platen powers, pressure, etching and passivation gas flows and steps duration were investigated to achieve all requirements. As well interactions between those different factors were characterized at different levels, from individual critical feature up to chip scale and to wafer scale. We will show the plasma process development and tuning to reach all these specifications. We also compared different chambers configurations of our ICP tool (source wafer distance, plasma diffusion) in order to obtain a good combination of hardware and process. With optimized etching we successfully fabricate micro-fluidic devices like micro-pumps.

Citation Download Citation

T. Magis, S. Ballerand, A. Bellemin Comte, and Olivier Pollet "Deep silicon etch for biology MEMS fabrication: review of process parameters influence versus chip design", Proc. SPIE 8612, Micromachining and Microfabrication Process Technology XVIII, 86120A (9 March 2013); https://doi.org/10.1117/12.2003765

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available