EUV actinic blank inspection tool with a high magnification review mode

Tomohiro Suzuki; Hiroki Miyai; Kiwamu Takehisa; Haruhiko Kusunose; Takeshi Yamane; Tsuneo Terasawa; Hidehiro Watanabe; Soichi Inoue; Ichiro Mori

doi:10.1117/12.964983

29 June 2012 EUV actinic blank inspection tool with a high magnification review mode

Tomohiro Suzuki, Hiroki Miyai, Kiwamu Takehisa, Haruhiko Kusunose, Takeshi Yamane, Tsuneo Terasawa, Hidehiro Watanabe, Soichi Inoue, Ichiro Mori

Author Affiliations +

Proceedings Volume 8441, Photomask and Next-Generation Lithography Mask Technology XIX; 844115 (2012) https://doi.org/10.1117/12.964983
Event: Photomask and NGL Mask Technology XIX, 2012, Yokohama, Japan

Abstract

Because the realization of defect-free Extreme Ultra-violet Lithography (EUVL) mask blanks is uncertain, the defect mitigation techniques are becoming quite important. One mitigation technique, "Pattern shift", is a technique that places a device pattern to cover multilayer (ML) defects underneath the absorber pattern in such a way that the ML defects are not printed onto wafers. This mitigation method requires the defect coordinate accuracy of down to tens of nanometers. Consequently, there is a strong demand for a Blank Inspection tool that is capable of providing such defect coordinate accuracy. To meet such requirement, we have started to develop a high accuracy defect locating function as an optional feature to our EUV Actinic Blank Inspection (ABI) system which is currently being developed aiming at HVM hp16 nm-11 nm node. Since a 26x Schwarzschild optics is used in this inspection tool, it is quite difficult to pinpoint defect location with high accuracy. Therefore we have decided to realize a high magnification review optics of 600x or higher by adding two mirrors to the Schwarzschild optics. One of the additional two mirrors is retractable so that the magnification can be switched according to the purpose of inspections. The high magnification review mode locates defect coordinates accurately with respect to the fiducial position. We set the accuracy target at 20 nm so that the mitigation technique can be implemented successfully. The optical configuration proposed in this paper allows both a high speed inspection for HVM and a high accuracy defect locating function to be achieved on one inspection system.

Citation Download Citation

Tomohiro Suzuki, Hiroki Miyai, Kiwamu Takehisa, Haruhiko Kusunose, Takeshi Yamane, Tsuneo Terasawa, Hidehiro Watanabe, Soichi Inoue, and Ichiro Mori "EUV actinic blank inspection tool with a high magnification review mode", Proc. SPIE 8441, Photomask and Next-Generation Lithography Mask Technology XIX, 844115 (29 June 2012); https://doi.org/10.1117/12.964983

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE