Paper
22 February 2012 The fabrication and performance analysis of proton implantation VCSEL
Mingming Mao, Chen Xu, Simin Wei, Yiyang Xie, Tian Cao
Author Affiliations +
Abstract
Three different aperture diameters (6μm,8μm,10μm) of proton implantation vertical cavity surface emitting lasers (VCSEL) are fabricated by two different group energy bombardment, where the epitaxial structure is designed lasing at 850nm. The injection energy is 300kev, 230kev and 330kev, 250kev, 160kev respectively, in order to confine the current path. To avoid channel effect while injecting and to make the actual fabrication process behind convenient, 5000Å SiO2 was deposited on the surface of the wafer. Photoresist and Au are used as the mask to protect the lasing area against bombardment, respectively. When the aperture diameters is 10μm and under the two times bombardment, the output power of continuously at room temperature is reached at 2.4mw, while the same aperture diameters under three times bombardment is only 0.5mw. Further analysis indicates that the distance of injection peak value from the active region is a critical parameter to determine the output power.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mingming Mao, Chen Xu, Simin Wei, Yiyang Xie, and Tian Cao "The fabrication and performance analysis of proton implantation VCSEL", Proc. SPIE 8333, Photonics and Optoelectronics Meetings (POEM) 2011: Optoelectronic Devices and Integration, 83330M (22 February 2012); https://doi.org/10.1117/12.915693
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Photomasks

Silica

Gold

Oxides

Photoresist materials

Corrosion

Back to Top