Paper
5 April 2012 Photoresist qualification using scatterometry CD
Roie Volkovich, Yosef Avrahamov, Guy Cohen, Patricia Fallon, Wenyan Yin
Author Affiliations +
Abstract
As the semiconductor industry advances to smaller design rules, Photoresist performance is critical for the tight lithography process. Critical Dimension (CD), Side Wall Angle (SWA) and Photoresist height, which are critical for the final semiconductor patterning, depend on the Photoresist chemistry. Each Photoresist batch has to be qualified to verify that it can achieve the required quality specifications. Photoresist qualification is done by exposing Photoresist and monitoring outcome after developing. In this work, Archer 300LCM scatterometry-based Optical CD (OCD) was evaluated using Dow 193 Immersion Top Coat Free Photoresist and Anti Reflection Layers (ARL). As part of the sensitivity analysis, changes in Photoresist thickness, ARL thickness and Photoresist formulation were evaluated. Results were compared to CD-SEM measurements. The CD sensitivity was evaluated on two grating dense line and space features with nominal Middle CD (MCD) values of 37nm and 75nm. Sensitivity of the OCD for Photoresist parameters was demonstrated.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roie Volkovich, Yosef Avrahamov, Guy Cohen, Patricia Fallon, and Wenyan Yin "Photoresist qualification using scatterometry CD", Proc. SPIE 8324, Metrology, Inspection, and Process Control for Microlithography XXVI, 832437 (5 April 2012); https://doi.org/10.1117/12.918392
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoresist materials

Semiconducting wafers

Critical dimension metrology

Scatterometry

Optical lithography

Photoresist processing

Semiconductors

Back to Top