Paper
23 May 2011 Threat detection in desert environment with passive millimeter-wave sensor
Author Affiliations +
Abstract
A new technique for improvised explosive device (IED) creation uses an explosive device buried in foam and covered in a layer of dirt. These devices are difficult to detect visually, however, their material characteristics make them detectable by passive millimeter-wave (pmmW) sensors. Results are presented from a test using a mock IED and an outdoor set-up consisting of two mock IEDs on a dirt background. The results show that the mock IEDs produces a millimeter-wave signature which is distinguishable from the background surrounding the mock IEDs. Simulations based on the measured data are presented and a design for a future vehicle mounted sensor is shown.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John P. Wilson, Christopher A. Schuetz, Richard D. Martin, Thomas E. Dillon, Maciej Murakowski, and Dennis W. Prather "Threat detection in desert environment with passive millimeter-wave sensor", Proc. SPIE 8017, Detection and Sensing of Mines, Explosive Objects, and Obscured Targets XVI, 80170I (23 May 2011); https://doi.org/10.1117/12.882929
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Improvised explosive devices

Foam

Extremely high frequency

Sensors

Millimeter wave sensors

Signal detection

Metals

Back to Top