A MEMS fabrication approach for a 200GHz microklystron driven by a small-scaled pseudospark electron beam

Tom Schuhmann; Jonathan Protz; David Fields; Helen Yin; Adrian Cross; Wenlong He; David Bowes; Kevin Ronald; Alan Phelps

doi:10.1117/12.864902

12 October 2010 A MEMS fabrication approach for a 200GHz microklystron driven by a small-scaled pseudospark electron beam

Tom Schuhmann, Jonathan Protz, David Fields, Helen Yin, Adrian Cross, Wenlong He, David Bowes, Kevin Ronald, Alan Phelps

Author Affiliations +

Proceedings Volume 7837, Millimetre Wave and Terahertz Sensors and Technology III; 783705 (2010) https://doi.org/10.1117/12.864902
Event: SPIE Security + Defence, 2010, Toulouse, France

Abstract

High performance terahertz (THz) radiation sources hold great promise for a variety of military and space applications. With micro-electro-mechanical systems (MEMS) fabrication techniques, it is possible to attain the smaller, more precisely machined resonant structures required by Vacuum Electronic Devices (VEDs) to function in these frequencies. The research presented here proposes a design and fabrication process for a micro-klystron with a targeted operating frequency of 200 GHz; being developed jointly by Duke University, the University of Strathclyde, UK, and Logos Technologies. It also analyzes the use of a pseudospark (PS) discharge as a novel electron beam source to drive the klystron. Dimensional tolerances are investigated using both analytic and numeric techniques. The incorporation of alignment structures into the fabrication process that utilize kinematic and elastic averaging effects, along with clever stacking techniques, allows submicron alignment tolerances yielding an expected power output of approximately 5W per klystron with an overall efficiency of 20%. The device proposed here, with a volume on the order of 0.01 cc, should be capable of output power densities of up to 1kW/cc. A fabrication run recently completed at MIT's Microsystems Technology Laboratories yielded promising results and 32 silicon die were successfully bonded into a stack 1.4cm tall. Difficulties remain, however, in controlling surface roughness and integrating a klystron with alignment features for parallel processing. Several alternative fabrication schemes have been proposed and another fabrication run based on these modifications is currently underway.

Citation Download Citation

Tom Schuhmann, Jonathan Protz, David Fields, Helen Yin, Adrian Cross, Wenlong He, David Bowes, Kevin Ronald, and Alan Phelps "A MEMS fabrication approach for a 200GHz microklystron driven by a small-scaled pseudospark electron beam", Proc. SPIE 7837, Millimetre Wave and Terahertz Sensors and Technology III, 783705 (12 October 2010); https://doi.org/10.1117/12.864902

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE