Paper
18 May 2011 Monitoring of vacuum assisted resin transfer moulding (VARTM) process with superimposed Fiber-Bragg-gratings
S. Triollet, L. Robert, E. Marin, Y. Ouerdane
Author Affiliations +
Proceedings Volume 7753, 21st International Conference on Optical Fiber Sensors; 77538W (2011) https://doi.org/10.1117/12.884855
Event: 21st International Conference on Optical Fibre Sensors (OFS21), 2011, Ottawa, Canada
Abstract
We report the instrumentation of a manufacturing composite process using an optical fiber sensor based on Bragg gratings. The sensor is made of superimposed Long Period (LPG) and short period (FBG) Bragg gratings written in the same fiber section. The monitoring of the process needs simultaneous measurements of temperature and strain. It has been shown that these two solicitations can be determined and discriminated with a superimposed FBG/LPG sensor [1]. In this paper we present the device based on the dual superimposed gratings. The sensor is embedded in a composite specimen manufactured by Vacuum Assisted Resin Transfer Moulding (VARTM) process for monitoring purpose.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Triollet, L. Robert, E. Marin, and Y. Ouerdane "Monitoring of vacuum assisted resin transfer moulding (VARTM) process with superimposed Fiber-Bragg-gratings", Proc. SPIE 7753, 21st International Conference on Optical Fiber Sensors, 77538W (18 May 2011); https://doi.org/10.1117/12.884855
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Sensors

Composites

Temperature metrology

Calibration

Manufacturing

Fiber optics sensors

Back to Top