Paper
16 November 2010 Reinforcement of titanium by laser metal deposition
Jesús Sampedro, Irene Pérez, Bernabé Cárcel, Vicente Amigó, José María Sánchez
Author Affiliations +
Proceedings Volume 7751, XVIII International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 775121 (2010) https://doi.org/10.1117/12.879317
Event: 18th International Symposium on Gas Flow and Chemical Lasers and High Power Lasers, 2010, Sofia, Bulgaria
Abstract
Pure commercial titanium is widely used because of its high corrosion resistance and lower cost compared with other titanium alloys, in particular when there is no high wear requirements. Nevertheless, the wear resistance is poor and surface damage occurs in areas under contact loadings. Laser melting deposition using a high power laser is a suitable technique for manufacturing precise and defect free coatings of a dissimilar material with higher wear and corrosion resistance. In this work a good understanding of laser metal deposition mechanisms allowed to obtain defect free coatings of Ti6Al4V and TiC metal matrix composite (MMC) using a flash lamp pumped Nd:YAG laser of 1 kW. A complete investigation of the process parameters is discussed and resultant wear and corrosion properties are shown. The results show the feasibility to apply the process for manufacturing, improving or repairing high added value components for a wide range of industrial sectors.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jesús Sampedro, Irene Pérez, Bernabé Cárcel, Vicente Amigó, and José María Sánchez "Reinforcement of titanium by laser metal deposition", Proc. SPIE 7751, XVIII International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 775121 (16 November 2010); https://doi.org/10.1117/12.879317
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Toxic industrial chemicals

Corrosion

Titanium

Resistance

Metals

Laser processing

Manufacturing

RELATED CONTENT

Laser dispersing of WC and TiC powders in light metal...
Proceedings of SPIE (January 08 2015)
Laser anti-corrosion treatment of metal surfaces
Proceedings of SPIE (February 22 2017)
Surface Treating By Laser Melt/Particle Injection
Proceedings of SPIE (October 24 1988)
Laser shock wave and its applications
Proceedings of SPIE (November 14 2007)

Back to Top