Paper
5 August 2010 Control system of a dispersed fringe type sensing system of active optics
Yajun Zhang, Zhenchao Zhang, Yong Zhang
Author Affiliations +
Abstract
Active optics plays an important part in segmented mirrors of astronomy telescopes. A dispersed fringe sensor(DFS) using a broadband point source is an efficient method for cophasing and is also highly automated and robust. DFS can estimate the piston between segments only through the spectrum formed by the transmissive grating's dispersion and therefore can replace the edge sensors. So we build an system in our lab to experiment the DFS method. The whole control system of DFS is put forward, including control of displacement actuators and control of shifting the optical fiber. Control of displacement actuators consists in industry computer, HY-6120 I/O card, six stepper motor and other parts. Some theoretical analysis and experiment tests reveal that the actuator could be controlled to 5nm and without backlash by this control strategy. The optical fiber could be shifted out of optical path or shifted in part or whole of optical path so that the spectrum formed by the transmissive grating's dispersion could alter. When six actuators are moving, the piston is changing, and the spectrum is also moving and altering. And the whole control of DFS system is constructed now and seems well. Further test and experiment will be carry out.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yajun Zhang, Zhenchao Zhang, and Yong Zhang "Control system of a dispersed fringe type sensing system of active optics", Proc. SPIE 7736, Adaptive Optics Systems II, 77364Q (5 August 2010); https://doi.org/10.1117/12.856342
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Control systems

Optical fibers

Mirrors

Active optics

Sensors

Control systems design

Back to Top