Comparison of V:YAG and V:LuAG saturable absorbers for Nd:YAG 1338 nm microchip laser Q-switching

Jan Šulc; Jakub Novák; Helena Jelínková; Karel Nejezchleb; Václav Škoda

doi:10.1117/12.854534

19 May 2010 Comparison of V:YAG and V:LuAG saturable absorbers for Nd:YAG 1338 nm microchip laser Q-switching

Jan Šulc, Jakub Novák, Helena Jelínková, Karel Nejezchleb, Václav Škoda

Proceedings Volume 7721, Solid State Lasers and Amplifiers IV, and High-Power Lasers; 772119 (2010) https://doi.org/10.1117/12.854534
Event: SPIE Photonics Europe, 2010, Brussels, Belgium

Abstract

Two saturable absorbers, V:YAG (V³⁺:Y₃Al₅O₁₂) and V:LuAG (V³⁺:Lu₃Al₅O₁₂), were compared as a passive Q-switches for microchip laser based on Nd:YAG gain medium. The emission wavelength of this laser was in 1.3 μm spectral range. Two Q-switched monolithic microchip laser devices were prepared: Nd:YAG/V:LuAG and Nd:YAG/V:YAG. Active Nd:YAG part of both microchip lasers was the same (4mm long, 1.1 at.% Nd/Y). The thickens of saturable absorbers ensured the same initial transmission (T₀ = 85%) of the passive Q-switch part (V:LuAG was 1.1mm long, V:YAG was 0.7mm long). The gain medium and the saturable absorber were diffusion bonded to form one monolithic crystal. The diameter of both crystals was 5 mm. Laser mirrors were deposited directly onto monolith faces. The output coupler with reflection 90% for the generated wavelength was placed on the V³⁺-doped part. The pump mirror (HT@808 nm, HR@1.3 μm) was placed on opposite monolith face. Lasers were tested under longitudinal continuous diode pumping and results were compared. Both lasers generated linearly polarized radiation at wavelength 1338nm with the lasing threshold 8W. Comparing the giant pulse parameters and the laser efficiency, the better results were obtained for Nd:YAG/V:YAG microchip laser. The pulse duration (FWHM) in this case was shorter (2.16±0.04 ns) and more stable than in Nd:YAG/V:LuAG case (3.3 ± 0.5 ns). The obtained average pulse energy was slightly higher for Nd:YAG/V:LuAG microchip laser (45 μJ) than for Nd:YAG/V:YAG (41 μJ) laser. However, due to shorter pulse length higher peak power (18.5 kW) was obtained with V:YAG saturable absorber than with V:LuAG (13.7 kW).

Citation Download Citation

Jan Šulc, Jakub Novák, Helena Jelínková, Karel Nejezchleb, and Václav Škoda "Comparison of V:YAG and V:LuAG saturable absorbers for Nd:YAG 1338 nm microchip laser Q-switching", Proc. SPIE 7721, Solid State Lasers and Amplifiers IV, and High-Power Lasers, 772119 (19 May 2010); https://doi.org/10.1117/12.854534

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Crystals

Pulsed laser operation

Nd:YAG lasers

Laser crystals

Q switches

Laser resonators

Interfaces

Show All Keywords

Keywords/Phrases

Search In:

Publication Years