Passively stabilized 215-W monolithic CW LMA-fiber laser with innovative transversal mode filter

Fabian Stutzki; Cesar Jauregui; Christian Voigtländer; Jens U. Thomas; Jens Limpert; Stefan Nolte; Andreas Tünnermann

doi:10.1117/12.841662

17 February 2010 Passively stabilized 215-W monolithic CW LMA-fiber laser with innovative transversal mode filter

Fabian Stutzki, Cesar Jauregui, Christian Voigtländer, Jens U. Thomas, Jens Limpert, Stefan Nolte, Andreas Tünnermann

Proceedings Volume 7580, Fiber Lasers VII: Technology, Systems, and Applications; 75801K (2010) https://doi.org/10.1117/12.841662
Event: SPIE LASE, 2010, San Francisco, California, United States

Abstract

We report on the development of a high power monolithic CW fiber oscillator with an output power of 215 W in a 20μm core diameter few-mode Large Mode Area fiber (LMA). The key parameters for stable operation are reviewed. With these optimizations the root mean square of the output power fluctuations can be reduced to less than 0.5 % on a timescale of 20 s, which represents an improvement of more than a factor 5 over a non-optimized fiber laser. With a real-time measurement of the mode content of the fiber laser it can be shown that the few-mode nature of LMA fibers is the main factor for the residual instability of our optimized fiber laser. The root of the problem is that Fiber Bragg Gratings (FBGs) written in multimode fibers exhibit a multi-peak reflexion spectrum in which each resonance corresponds to a different transversal mode. This reflectivity spectrum stimulates multimode laser operation, which results in power and pointing instabilities due to gain competition between the different transversal modes . To stabilize the temporal and spatial behavior of the laser output, we propose an innovative passive in-fiber transversal mode filter based on modified FBG-Fabry Perot structure. This structure provides different reflectivities to the different transversal modes according to the transversal distribution of their intensity profile. Furthermore, this structure can be completely written into the active fiber using fs-laser pulses. Moreover, this concept scales very well with the fiber core diameter, which implies that there is no performance loss in fibers with even larger cores. In consequence this structure is inherently power scalable and can, therefore, be used in kW-level fiber laser systems.

Citation Download Citation

Fabian Stutzki, Cesar Jauregui, Christian Voigtländer, Jens U. Thomas, Jens Limpert, Stefan Nolte, and Andreas Tünnermann "Passively stabilized 215-W monolithic CW LMA-fiber laser with innovative transversal mode filter", Proc. SPIE 7580, Fiber Lasers VII: Technology, Systems, and Applications, 75801K (17 February 2010); https://doi.org/10.1117/12.841662

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available