Paper
14 April 2010 Selective mode excitation of Lamb wave in composite laminates
S. Saravanan, N. Q. Guo, B. S. Wong, F. Ju
Author Affiliations +
Proceedings Volume 7522, Fourth International Conference on Experimental Mechanics; 75223B (2010) https://doi.org/10.1117/12.851655
Event: Fourth International Conference on Experimental Mechanics, 2009, Singapore, Singapore
Abstract
Lamb wave has a great potential for structural health monitoring of large area structures due to its long range propagation. The piezo array configurations and array pitch for selective mode excitation are first studied with 2D FE models in a composite plate. A single PZT actuator bonded on the top surface of the laminate in unimorph configuration excites both symmetric mode (S0) and anti-symmetric mode (A0). The A0 mode is predominant and four times stronger than the S0 mode. The second configuration is a bimorph where the PZT actuators are bonded on either side of the laminate. The in-phase excitation of PZT actuators suppress the A0 mode and excite only the S0 mode, while the out-of-phase excitation eliminates the S0 mode and launches the A0 mode in the laminate. The third configuration is the unimorph array configuration where PZT actuators are bonded on the top surface of the laminate. By keeping the array pitch equal to half wavelength of the S0 mode, the S0 mode gets suppressed by twelve times. The FE results are checked with experiments.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Saravanan, N. Q. Guo, B. S. Wong, and F. Ju "Selective mode excitation of Lamb wave in composite laminates", Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics, 75223B (14 April 2010); https://doi.org/10.1117/12.851655
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Ferroelectric materials

Composites

Structural health monitoring

Sensors

Signal generators

Wave propagation

Back to Top