Paper
20 November 2009 Development of oral cavity inspecting system
Hongxia Zhang, Di Wu, Dagong Jia, Yimo Zhang
Author Affiliations +
Abstract
An oral cavity inspecting system is designed and developed to inspect the detail of teeth. The inspecting system is composed of microscopic imaging part, illuminating part, image capture and processing, display part. The two groups of cemented lenses were optimized to minimize the optical aberration and the collimated beam light is gotten between the two lenses. A relay lens is adopted to allow the probe to access the oral cavity depth. The illumination optic fiber is used and the brightness and color temperature can be adjustable. The illumination fiber end surface is oblique cut and the optimum angle is 37°. The image of teeth is imaged on CMOS and captured into computer. The illumination intensity and uniformity were tested and the proper parameter is set. Foucault chart was observed and the system resolution is higher than 100lp/mm. The oral inspecting system is used to test standard tooth model and patho-teeth model. The tooth image is clear and the details can be observed. The experimental results show that the system could meet dental medical application requirements.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongxia Zhang, Di Wu, Dagong Jia, and Yimo Zhang "Development of oral cavity inspecting system", Proc. SPIE 7511, 2009 International Conference on Optical Instruments and Technology: Optoelectronic Measurement Technology and Systems, 75110F (20 November 2009); https://doi.org/10.1117/12.837519
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Imaging systems

Teeth

Endoscopes

Inspection

Lenses

Image processing

Image sensors

RELATED CONTENT


Back to Top