Paper
10 July 2009 FE analysis of drive process of piezoelectric motor
Yanmei Cui, Xianzhang Feng, Zhiqiang Jiang
Author Affiliations +
Proceedings Volume 7490, PIAGENG 2009: Intelligent Information, Control, and Communication Technology for Agricultural Engineering; 749010 (2009) https://doi.org/10.1117/12.836773
Event: International Conference on Photonics and Image in Agriculture Engineering (PIAGENG 2009), 2009, Zhangjiajie, China
Abstract
Bases on inverse piezoelectric effect of piezoceramics, element of piezoelectric actuator were made from combination of piezoelectric bimorphs. Piezoelectric bimorph cantilever vibration under electrical exciting signals was studied. Piezoelectric motor of the friction style was made based on the concept that frictional and inertial force can drive the rotor and give output torque. Due to electromechanical coupling characteristics of piezoceramics, the finite element method was applied to mechanical and electrical analysis of piezoelectric motor. Element of piezoelectric actuator of motor was dispersed a series of tetrahedron cells, from which the finite element model was obtained by piezoelectric constitutive equations coupling finite element model of displacement and electricity. Numerical result agrees with the experiments, which verifies the rationality of piezoelectric motor using the distortion of piezoelectric bimorphs. The method guides the design, manufacture and test of piezoelectric motor.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yanmei Cui, Xianzhang Feng, and Zhiqiang Jiang "FE analysis of drive process of piezoelectric motor", Proc. SPIE 7490, PIAGENG 2009: Intelligent Information, Control, and Communication Technology for Agricultural Engineering, 749010 (10 July 2009); https://doi.org/10.1117/12.836773
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Finite element methods

Piezoelectric effects

Actuators

Distortion

Metals

Design for manufacturability

Back to Top