Paper
21 August 2009 Production of mirrors made of HB-Cesic® for an airborne reconnaissance telescope system
Matthias R. Krödel, Peter Hofbauer, Georg Luichtel, J. Katzer, M. Tausendfreund, Gerhard Derst
Author Affiliations +
Abstract
In support of a new airborne telescope system the Multi-Spectral Telescope for a new Reconnaissance Program ECM was contracted by Carl Zeiss Optronics to produce 20 mirrors made of HB-Cesic®, each mirror with a diameter of 315 mm. The contract requirements were that the mirrors remain stable under extreme mechanical and thermal loads and that the production schedule is 12 months. The main challenges of the project were achieving consistent optical performance of the mirrors and meeting the tight schedule of delivering the mirrors, in lots of four, every two months for a total delivery time of twelve months. In this paper we present the lessons learned in producing the HB-Cesic® mirrors, including all the steps up to the final integration of the mirrors into the telescope system and establishing reliable repeatability of the production cycles.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthias R. Krödel, Peter Hofbauer, Georg Luichtel, J. Katzer, M. Tausendfreund, and Gerhard Derst "Production of mirrors made of HB-Cesic® for an airborne reconnaissance telescope system", Proc. SPIE 7425, Optical Materials and Structures Technologies IV, 74250D (21 August 2009); https://doi.org/10.1117/12.825123
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Telescopes

Polishing

Manufacturing

Thermography

Prototyping

Near field optics

Back to Top