Paper
10 February 2009 Visualization and PIV analysis of shock-failure behavior of brittle bodies
K. Takehara, T. G. Etoh, T. Tamano, M. Kanaoka, N. Mizutani
Author Affiliations +
Proceedings Volume 7126, 28th International Congress on High-Speed Imaging and Photonics; 71260T (2009) https://doi.org/10.1117/12.821885
Event: 28th International Congress on High-Speed Imaging and Photonics, 2008, Canberra, Australia
Abstract
The authors applied an ultra-high-speed video camera to visualize crack propagation in brittle bodies, such as mortar specimens, under the impact splitting test. Strain of the brittle bodies in impact splitting tests was analyzed by means of PIV (Particle Image Velocimtery), which is usually used for measurements of flow fields with tracer particles. The results show that, when the applied impulse on the mortar specimens is increased, the crack propagation velocity reaches an upper bound. The upper bound of the crack propagation velocity was 2.6 km/sec. The horizontal tensile strain around the crack tip was estimated to be 370 μ by PIV measurement with the ultra-high-speed camera, and 270 - 375 μ by strain gages, respectively. Those results showed a good agreement with each other.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
K. Takehara, T. G. Etoh, T. Tamano, M. Kanaoka, and N. Mizutani "Visualization and PIV analysis of shock-failure behavior of brittle bodies", Proc. SPIE 7126, 28th International Congress on High-Speed Imaging and Photonics, 71260T (10 February 2009); https://doi.org/10.1117/12.821885
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Video

High speed cameras

Visualization

Failure analysis

Visual analytics

Analytical research

Back to Top