Paper
26 August 2008 Laser beam shaping with membrane deformable mirrors
Author Affiliations +
Abstract
The performance of laser machining systems can often be improved by adjusting the intensity profile of the beam on the target. Shaping a laser intensity profile can be efficiently accomplished by adjusting the spatial phase of the beam before propagating the beam a distance to the target. Beam shaping can be accomplished with passive diffractive elements, but this technique is only capable of creating a single intensity profile and is usually very sensitive to the input beam characteristics. Beam shaping with active optical elements like deformable mirrors can enable the system to achieve multiple shapes and compensate for non-ideal input beams, but can be very expensive. We present here a demonstration of laser beam shaping with low-cost membrane deformable mirrors.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brian G. Henderson and Justin D. Mansell "Laser beam shaping with membrane deformable mirrors", Proc. SPIE 7093, Advanced Wavefront Control: Methods, Devices, and Applications VI, 70930I (26 August 2008); https://doi.org/10.1117/12.796714
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Beam shaping

Adaptive optics

Deformable mirrors

Actuators

Ray tracing

Cameras

Optimization (mathematics)

Back to Top