A wet chemistry approach to sub-micron removable flip chip interconnects

Christopher J. Orendorff; Joy M. Barker; Adam M. Rowen; W. Graham Yelton; Christian L. Arrington; J. Rusty Gillen

doi:10.1117/12.795287

9 September 2008 A wet chemistry approach to sub-micron removable flip chip interconnects

Christopher J. Orendorff, Joy M. Barker, Adam M. Rowen, W. Graham Yelton, Christian L. Arrington, J. Rusty Gillen

Proceedings Volume 7039, Nanoengineering: Fabrication, Properties, Optics, and Devices V; 70390R (2008) https://doi.org/10.1117/12.795287
Event: NanoScience + Engineering, 2008, San Diego, California, United States

Abstract

Higher performance is the main driver in the integrated circuit (IC) market, but along with added function comes the cost of increased input/output connections and larger die sizes. Space saving approaches aimed at solving these challenges includes two technologies; 3D stacking (3D-ICs) and flip chip assemblies. Emerging ICs require sub-micron scale interconnects which include vias for 3D-ICs and bump bonds for flip chips. Photolithographic techniques are commonly used to prepare templates followed by metal vapor deposition to create flip chip bump bonds. Both the lithography step and the metal properties required for bump bonding contribute to limiting this approach to a minimum bump size of ~10 μm. Here, we present a wet chemistry approach to fabricating uniform bump bonds of tunable size and height down to the nanoscale. Nanosphere lithography (NSL), a "soft" lithographic technique, is used to create a bump bond template or mask for nanoscale bumps. Electrochemical deposition is also used through photoresist templates to create uniform bump bonds across large area wafers or dies. This template approach affords bumps with tunable diameters from 100s of nanometers to microns (allowing for tunable interconnect pitch and via diameters) while the use of constant current electoplating gives uniform bump height over large areas (>1 cm²).

Citation Download Citation

Christopher J. Orendorff, Joy M. Barker, Adam M. Rowen, W. Graham Yelton, Christian L. Arrington, and J. Rusty Gillen "A wet chemistry approach to sub-micron removable flip chip interconnects", Proc. SPIE 7039, Nanoengineering: Fabrication, Properties, Optics, and Devices V, 70390R (9 September 2008); https://doi.org/10.1117/12.795287

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available