Printability impact of progressive defects: ammonium sulfate emulation study

Brian Grenon; Tracy Huang; Aditya Dayal; Kaustuve Bhattacharyya

doi:10.1117/12.793048

19 May 2008 Printability impact of progressive defects: ammonium sulfate emulation study

Brian Grenon, Tracy Huang, Aditya Dayal, Kaustuve Bhattacharyya

Proceedings Volume 7028, Photomask and Next-Generation Lithography Mask Technology XV; 702817 (2008) https://doi.org/10.1117/12.793048
Event: Photomask and NGL Mask Technology XV, 2008, Yokohama, Japan

Abstract

In the relentless pursuit of device miniaturization and sustainable yield performance, resolution enhancement techniques (RET) such as optical proximity correction (OPC) and sub-resolution assist feature (SRAF) are identified as enabling technologies that fuel the industry. The introduction of advanced reticles, however, considerably augments the mask error enhancement factor (MEEF) where the growth of progressive defects or haze is accelerated by repeated laser exposure, and continues to be a source of reticle degradation threatening device yield. Previous investigations have identified ammonium sulfate, cyanuric acid and ammonium oxalate as the primary and most concerning species found in both mask shop and wafer fabs. In this work, magnesium sulfate is used to emulate crystal growth due to its identical optical properties to ammonium sulfate. A technique has been developed to deposit magnesium sulfate of varying concentrations onto chemically cleaned reticle surfaces. These defects are then inspected with a high resolution reticle inspection system enabled with MEEF detector Litho3. Upon inspection, defects are classified and analyzed with respect to their location relative to device geometry, optical transmission loss as well as the residing surface. Ammonium oxalate crystals are also deposited separately onto reticle surface to comprehend the impact of crystal type and population on defect printability. Compositional analysis are carried out using Raman spectroscopy and time-of-flight secondary ion mass spectroscopy (TOF-SIMS) to correlate the amount of magnesium sulfate and ammonium oxalate crystals with transmission loss. Such emulation study of various crystal formulation mimics progressing stages of crystallization and allows a mechanistic understanding of crystal congregation, transmission loss and defect printability.

Citation Download Citation

Brian Grenon, Tracy Huang, Aditya Dayal, and Kaustuve Bhattacharyya "Printability impact of progressive defects: ammonium sulfate emulation study", Proc. SPIE 7028, Photomask and Next-Generation Lithography Mask Technology XV, 702817 (19 May 2008); https://doi.org/10.1117/12.793048

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available