1European Space Agency, ESTEC (Netherlands) 2National Space Institute, DTU (Denmark) 3Physikalisch-Technische Bundesandstalt (Germany) 4Cosine Research (Netherlands)
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
We describe a set of measurements on coated silicon substrates that are representative of the material to be used for the
XEUS High Performance Pore Optics (HPO) technology. X-ray angular reflectance measurements at 2.8 and 8 keV, and
energy scans of reflectance at a fixed angle representative of XEUS graze angles are presented. Reflectance is
significantly enhanced for low energies when a low atomic number over-coating is applied. Modeling of the layer
thicknesses and roughness is used to investigate the dependence on the layer thicknesses, metal and over coat material
choices. We compare the low energy effective area increase that could be achieved with an optimized coating design.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.
The alert did not successfully save. Please try again later.
D. H. Lumb, C. P. Jensen, M. Krumrey, L. Cibik, F. Christensen, M. Collon, M. Bavdaz, "Low atomic number coating for XEUS silicon pore optics," Proc. SPIE 7011, Space Telescopes and Instrumentation 2008: Ultraviolet to Gamma Ray, 70111D (15 July 2008); https://doi.org/10.1117/12.789664