Paper
14 May 2008 IC-compatible microspectrometer using a planar imaging diffraction grating
Author Affiliations +
Abstract
The design and performance of a highly miniaturized spectrometer fabricated using MEMS technologies are reported in this paper. Operation is based on an imaging diffraction grating. Minimizing fabrication complexity and assembly of the micromachined optical and electronic parts of the microspectrometer implies a planar design. It consists of two parallel glass plates, which contain all spectrograph components, including slit and diffraction grating, and can be fabricated on a single glass wafer with standard lithography. A simple analytical model for determining spectral resolution from device dimensions was developed and used for finding the optimal parameters of a miniaturized spectrometer as a compromise between size and spectral resolution. The fabricated spectrometer is very compact (11 × 1.5 × 3 mm3), which allowed mounting directly on top of an image sensor. The realized spectrometer features a 6 nm spectral resolution over a 100 nm operating range from 600 nm to 700 nm, which was tested using a Ne light source.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Grabarnik, A. Emadi, H. Wu, G. De Graaf, G. Vdovin, and R. F. Wolffenbuttel "IC-compatible microspectrometer using a planar imaging diffraction grating", Proc. SPIE 6992, Micro-Optics 2008, 699215 (14 May 2008); https://doi.org/10.1117/12.781103
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectroscopy

Diffraction gratings

Spectral resolution

Glasses

Diffraction

Optical design

Lithography

Back to Top