Apparent temperature dependence on localized atmospheric water vapor

Matthew Montanaro; Carl Salvaggio; Scott D. Brown; David W. Messinger; Alfred J. Garrett

doi:10.1117/12.774694

11 April 2008 Apparent temperature dependence on localized atmospheric water vapor

Matthew Montanaro, Carl Salvaggio, Scott D. Brown, David W. Messinger, Alfred J. Garrett

Proceedings Volume 6966, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XIV; 696618 (2008) https://doi.org/10.1117/12.774694
Event: SPIE Defense and Security Symposium, 2008, Orlando, Florida, United States

Abstract

The atmosphere is a critical factor in remote sensing. Radiance from a target must pass through the air column to reach the sensor. The atmosphere alters the radiance reaching the sensor by attenuating the radiance from the target via scattering and absorption and by introducing an upwelling radiance. In the thermal infrared, these effects will introduce errors in the derived apparent temperature of the target if not properly accounted for. The temperature error is defined as the difference between the target leaving apparent temperature and observed apparent temperature. The effects of the atmosphere must be understood in order to develop methods to compensate for this error. Different atmospheric components will affect the radiation passing through it in different ways. Certain components may be more important than others depending on the remote sensing application. The authors are interested in determining the actual temperature of the superstructure that composes a mechanical draft cooling tower (MDCT), hence water vapor is the primary constituent of concern. The tower generates a localized water vapor plume located between the target and sensor. The MODTRAN radiative transfer code is used to model the effects of a localized exhaust plume from a MDCT in the longwave infrared. The air temperature and dew point depression of the plume and the thickness of the plume are varied to observe the effect on the apparent temperature error. In addition, the general atmospheric conditions are varied between two standard MODTRAN atmospheres to study any effect that ambient conditions have on the apparent temperature error. The Digital Imaging and Remote Sensing Image Generation (DIRSIG) modeling tool is used to simulate the radiance reaching a thermal sensor from a target after passing through the water vapor plume. The DIRSIG results are validated against the MODTRAN results. This study shows that temperature errors of as much as one Kelvin can be attributed to the presence of a localized water vapor plume.

Citation Download Citation

Matthew Montanaro, Carl Salvaggio, Scott D. Brown, David W. Messinger, and Alfred J. Garrett "Apparent temperature dependence on localized atmospheric water vapor", Proc. SPIE 6966, Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery XIV, 696618 (11 April 2008); https://doi.org/10.1117/12.774694

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available