Ferrogels are soft polymer materials containing a filler of magnetic particles that allow the material to be activated by
magnetic fields. These materials have shown capabilities for large strains, fast response, ease of synthesis and
biocompatibility and have potential applications including artificial muscles, controlled drug release systems, and
hyperthermia cancer treatment. In this work the actuator behavior for a selection of ferrogel compositions and synthesis
methods are characterized including their free strain and loading behavior. Samples were synthesized using either
chemical or physical methods for samples containing PVA of 4, 8, and 12 wt% and magnetic particles of 1, 5, and 10
wt%. This samples were then tested for free strain and strain under loads of up to 4 times their weight by exposing them
of fields from between 0.2 and 0.25T. Results show that softer samples with the largest amount of iron achieve the
largest strains. Thus, chemically crosslinked sample with 4 wt% PVA and 10 wt% iron achieved the largest strain of
almost 40%. Soft samples however exhibit low loaded capabilities with a blocked load of 1.7g identified. The
physically crosslinked samples which were stiffer achieved very good loading capabilities with only a 20% strain
decrease when loaded up to 400% of their weight. This translated in to a energy density of 320 J/m3 making these
materials very promising for actuator applications.
|