Paper
8 February 2008 Flexible film waveguides with excellent bending properties
Y. Maeda, Y. Hashiguchi
Author Affiliations +
Abstract
We have developed a film waveguide which has excellent bending properties. The waveguide can be fabricated by existing exposure/development processes and facilities with a core and a cladding dry film. Based on the bending loss simulation results, we fabricated the film waveguides of which the core-cladding index difference (relative index difference) of the waveguide was 3.1% and were evaluated transmission and bending properties. The propagation loss measured by a cut-back method was 0.15dB/cm at wavelength of 850nm. There was little change in optical loss on a 360-degree bend test with a 2mm radius of curvature. No loss increase and no damage to the film waveguide were observed after MIT folding endurance test more than one hundred thousand times with a 2mm bending radius of curvature at -30, 23 and 85 °C. The film waveguide demonstrated good folding endurance over a wide range of temperatures.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Y. Maeda and Y. Hashiguchi "Flexible film waveguides with excellent bending properties", Proc. SPIE 6899, Photonics Packaging, Integration, and Interconnects VIII, 68990D (8 February 2008); https://doi.org/10.1117/12.761081
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Cladding

Wave propagation

Mobile devices

Optical properties

Optical lithography

Temperature metrology

Back to Top