Paper
20 February 2008 Optimizing the use of laser alignment thermal sensitive paper for a 1.54 micron Er-glass laser
Author Affiliations +
Abstract
Laser alignment thermal sensitive paper can be used for laser applications such as spot size measurements, beam characteristics, and determining beam mode. Thermal sensitive paper interactions with a 1.54 micron, 35 ns, 3.75 J, Er-Glass laser produced spots that had three concentric zones of response. These spots interact with each other if a minimum distance between exposures is not maintained. The distance needed between spots is directly related to the energy density incident upon the paper. Although there was no lot designation for the box of thermal sensitive papers used in this research, we were able to determine that the response of different papers in the same box could vary under constant laser exposure parameters. Therefore, investigators need to be cautious when extrapolating experimental data from exposures using this type of laser alignment paper.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kenneth J. Walter, Thomas E. Eurell, and Thomas E. Johnson "Optimizing the use of laser alignment thermal sensitive paper for a 1.54 micron Er-glass laser", Proc. SPIE 6854, Optical Interactions with Tissue and Cells XIX, 685419 (20 February 2008); https://doi.org/10.1117/12.768244
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Laser applications

Laser tissue interaction

Target detection

Calibration

Optical testing

Head

RELATED CONTENT

The new SOXS instrument for the ESO NTT
Proceedings of SPIE (August 09 2016)
Latest metrology results with the SOLEIL synchrotron LTP
Proceedings of SPIE (September 15 2005)
Laser marking of slide calipers
Proceedings of SPIE (August 15 1998)
Versatile Method For Measuring Absolute Grating Efficiencies
Proceedings of SPIE (November 15 1979)

Back to Top