Paper
7 February 2008 Transmission of LED-light through optical fibers for optical tissue diagnostics
Simone Mitterer, Tobias Beck, André Erhardt, Christian Betz, Hilmar Schachenmayr, Herbert Stepp
Author Affiliations +
Abstract
Background: High brightness light emitting diodes (LEDs) have become available that appear suitable to replace light sources currently used for illumination through thin light guides, e.g. in endoscopy. We investigated the essential characteristics of a series of commercial single LEDs relevant for direct coupling to a single optical multimode fiber. Methods: LED fiber coupling efficiency was assessed experimentally and theoretically by using a ray tracing software. Results: Surface emitting LEDs proved suitable to be coupled directly into plastic optical fibers (POFs). We have successfully applied a 1 mm core POF-fiber (outer diameter 1.01 mm) in contact with a OSTAR LED (Osram Opto Semiconductors, Regensburg, Germany) to achieve a coupling efficiency of 10-20%, which gave 42 mW, 23.7 mW and 27 mW for blue, green and red LED respectively. Ray tracing simulation revealed a considerable part of photons travelling "out of axis" in spirals along the core-clad interface (non-meridional beams). They account for approximately 30% of the transmitted power.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Simone Mitterer, Tobias Beck, André Erhardt, Christian Betz, Hilmar Schachenmayr, and Herbert Stepp "Transmission of LED-light through optical fibers for optical tissue diagnostics", Proc. SPIE 6852, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications VIII, 68520X (7 February 2008); https://doi.org/10.1117/12.763714
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Polymer optical fibers

Tissue optics

Fiber couplers

Light sources

Optical fibers

Ray tracing

Back to Top