Paper
26 November 2007 Direct and simultaneous detection of temperature and strain using combined Brillouin and Raman backscatters in single mode fiber
Haiyun Xia, Hongqian Mu, Yuanhong Yang, Dongsong Sun
Author Affiliations +
Abstract
A novel direct detection method for simultaneous distributed measurement of the temperature and strain along a single mode fiber based on the optical time-domain reflectometer technique is proposed. The Raman backscattering is sensitive to temperature but not to strain, thus the temperature distribution along the fiber can be determined. A twin-channel Fabry-Perot interferometer is designed; of which, the Brillouin channel is used to analyze the strain information within measurement range of 2000 με strain and 400 °C temperature. The frequency center, spectrum bandwidth and intensity changes of Brillouin backscattering are transformed into transmission changes after passing through the Fabry-Perot interferometer. With the look-up table of response functions of detected temperature, the strain profile along the fiber can be known. The Rayleigh channel is design to preset and measure the outgoing laser frequency relative to the Brillouin channel. By modulating the voltage added to the piezoelectric tube of the Fabry-Perot interferometer, the frequency offset of outgoing laser to the Brillouin channel can be preset; the temperature dynamic range can be extended.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haiyun Xia, Hongqian Mu, Yuanhong Yang, and Dongsong Sun "Direct and simultaneous detection of temperature and strain using combined Brillouin and Raman backscatters in single mode fiber", Proc. SPIE 6830, Advanced Sensor Systems and Applications III, 683021 (26 November 2007); https://doi.org/10.1117/12.757639
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Backscatter

Raman spectroscopy

Temperature metrology

Signal detection

Fabry–Perot interferometry

Light scattering

Sensors

Back to Top