Paper
12 September 2007 Switching properties of VAN LCoS devices with ultra-microscale electrodes
R. Ghannam, N. Collings, W. Crossland, R. James, S. Day, A. Fernandez
Author Affiliations +
Abstract
Nanolithographic fabrication techniques may soon enable electrically-driven LCoS devices to be manipulated using ultra-nanoscale CMOS transistors. However, questions as to the switching properties of such LCoS devices arise due to the diminishing dimensions of their transistors. Thus, experimental investigations into the response times and the onset-threshold voltages for LCoS devices were embarked upon. Such measurements were obtained for various electrode dimensions and cell gaps. Furthermore, an interdigitated (IDT) electrode pattern was used to drive the homeotropically-aligned NLC material in a direction parallel to the bounding planes of the cell. Experimental findings revealed that faster response times were achieved when the electrode spacings were decreased. Such results have shown that a 10μm-thick device with an electrode pitch of 2μm can achieve a switch-on time of < 5ms. In addition, decreasing the electrode spacing results in the threshold voltage to drop. The results therefore indicate that improvements in a LCoS device's switching properties can be realised by using smaller electrode dimensions.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. Ghannam, N. Collings, W. Crossland, R. James, S. Day, and A. Fernandez "Switching properties of VAN LCoS devices with ultra-microscale electrodes", Proc. SPIE 6654, Liquid Crystals XI, 66540R (12 September 2007); https://doi.org/10.1117/12.733228
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Switching

Liquid crystal on silicon

Silicon

Liquid crystals

Microscopes

Transistors

Back to Top