Paper
2 July 2007 Localized strain measurements using an integration method to process intensity reflection spectra from a chirped FBG
A. Nand, D. J. Kitcher, S. A. Wade, R. Jones, G. W. Baxter, S. F. Collins
Author Affiliations +
Proceedings Volume 6619, Third European Workshop on Optical Fibre Sensors; 661911 (2007) https://doi.org/10.1117/12.738392
Event: Third European Workshop on Optical Fibre Sensors, 2007, Napoli, Italy
Abstract
A chirped fiber Bragg grating was used to measure the non-uniform strain profile of a notched aluminum specimen used to simulate a cracked structure. The specimen was subjected to tensile tests that produced regions of non-uniform strain near the notches. Analysis of power reflectance spectra from the grating, through the use of an integration method, enabled the strain profile near the notches to be determined. Unlike other intragrating sensing methods, this method did not require a disturbance hypothesis to be postulated. The strain profile results from this intragrating sensor were in reasonable agreement with predictions from modeling conducted using the finite element method.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Nand, D. J. Kitcher, S. A. Wade, R. Jones, G. W. Baxter, and S. F. Collins "Localized strain measurements using an integration method to process intensity reflection spectra from a chirped FBG", Proc. SPIE 6619, Third European Workshop on Optical Fibre Sensors, 661911 (2 July 2007); https://doi.org/10.1117/12.738392
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Fiber Bragg gratings

Finite element methods

Reflectivity

Aluminum

Reflection

Epoxies

Back to Top