EUV MET printing and actinic imaging analysis on the effects of phase defects on wafer CDs

Hakseung Han M.D.; Kenneth A. Goldberg; Anton Barty; Eric M. Gullikson; Yoshiaki Ikuta; Toshiyuki Uno; Obert R. Wood; Stefan Wurm

doi:10.1117/12.711166

29 March 2007 EUV MET printing and actinic imaging analysis on the effects of phase defects on wafer CDs

Hakseung Han M.D., Kenneth A. Goldberg, Anton Barty, Eric M. Gullikson, Yoshiaki Ikuta, Toshiyuki Uno, Obert R. Wood, Stefan Wurm

Author Affiliations +

Proceedings Volume 6517, Emerging Lithographic Technologies XI; 65170B (2007) https://doi.org/10.1117/12.711166
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

Extreme ultraviolet (EUV) lithography technology has gradually developed, and the industry is now progressing toward beta EUV lithography processes. However, very little has been reported on the effects of phase defects on wafer critical dimension (CD) and on tolerable defect sizes. We have fabricated programmed defect masks with programmed substrate pits and absorbing iso line patterns. The substrate pit depth measured with AFM ranged from ~2-3 to ~6-10 nm and the full width half maximum (FWHM) varied from 45 to 150 nm. A line-pattern was etched into the reflective multilayer coating using focused ion beam (FIB) milling. The iso line pattern is 225nm wide, corresponding to 45nm on a wafer in 5x demagnification tool we used for the EUV exposure. In this paper, we will present an analysis of the measured relationship between phase defect size and CD change using data obtained with an EUV micro-exposure tool (MET) and with an actinic imaging microscope at Lawrence Berkeley National Laboratory. Printable distance between pit and line edge will also be discussed according to pit sizes. Comparison result between real test and aerial image simulation will be reported to confirm the simulation.

Citation Download Citation

Hakseung Han M.D., Kenneth A. Goldberg, Anton Barty, Eric M. Gullikson, Yoshiaki Ikuta, Toshiyuki Uno, Obert R. Wood, and Stefan Wurm "EUV MET printing and actinic imaging analysis on the effects of phase defects on wafer CDs", Proc. SPIE 6517, Emerging Lithographic Technologies XI, 65170B (29 March 2007); https://doi.org/10.1117/12.711166

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available