Paper
13 February 2007 Prediction of intensity and color degradation of LEDs
Author Affiliations +
Abstract
In this paper, a current-accelerated method for fast estimation of the intensity and color degradation with corresponding variability of light-emitting diodes (LEDs) is presented. The method is based on automated periodical spectral measurements of emitted light of LEDs under different current loads, which include nominal and several different above nominal currents. The intensity and color degradation and corresponding variability among different LEDs at a specified current are estimated by detailed analysis of the acquired spectral data at above nominal currents. The method was validated by comparing the predicted values with the measured values at nominal current. The proposed method was tested on white LEDs (luminous intensity ranged from 5 to 20 cd) from five manufacturers (Nichia, Etgtech, Sansen, Daina, and Velleman). The results show that the intensity and color degradation and corresponding variability among different LEDs is significant and, therefore, should be considered with great care when designing highly demanding lighting products.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Miran Bürmen, Franjo Pernuš, and Boštjan Likar "Prediction of intensity and color degradation of LEDs", Proc. SPIE 6486, Light-Emitting Diodes: Research, Manufacturing, and Applications XI, 64860M (13 February 2007); https://doi.org/10.1117/12.698987
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Manufacturing

Light sources and illumination

Light sources

Spectroscopy

Color prediction

Liquid phase epitaxy

RELATED CONTENT


Back to Top