Paper
26 April 2007 Beam characterization of a scalable 220 W-ceramic Nd:YAG laser
E. Favilla, E. Sani, M. Ciofini, A. Lapucci
Author Affiliations +
Proceedings Volume 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers; 63460W (2007) https://doi.org/10.1117/12.737391
Event: XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 2006, Gmunden, Austria
Abstract
We describe the analysis of the propagation properties of the beam extracted from a slab-shaped ceramic Nd:YAG laser. The YAG slab is face pumped by two horizontal arrays of quasi-CW diode bars delivering 1200 W in 150 &mgr;sec pulses up to a 15% duty cycle. The use of a hybrid stable-unstable resonator enables a maximum extraction of more than 215 W at 28% slope efficiency level, with a beam parameter product smaller than 3mm.mrad in both transverse directions. M2 values have been characterized as a function of the diode pumping current. Furthermore, by an analysis of the M2 trend as a function of the knife-edge clipping levels, we have been able to infer the modal composition of the beam in both the stable and unstable direction.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. Favilla, E. Sani, M. Ciofini, and A. Lapucci "Beam characterization of a scalable 220 W-ceramic Nd:YAG laser", Proc. SPIE 6346, XVI International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, 63460W (26 April 2007); https://doi.org/10.1117/12.737391
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resonators

Diodes

Nd:YAG lasers

Ceramics

Mirrors

YAG lasers

High power lasers

RELATED CONTENT


Back to Top