Paper
31 August 2006 Microlens fabrication using HEBS glass for compact high-resolution IR imaging system
Author Affiliations +
Abstract
Under the DARPA COMP-I (Compressive Optical MONTAGE Photography Initiative) program, the goal of this project is to significantly reduce the volume and form factor of infrared imaging systems without loss of resolution. The approach taken is to use an array of small lenses with extremely short focal lengths rather than the conventional approach of a single aperture lens system with large diameter and focal length. The array of lenses creates multiple copies of the scene on a single focal plane detector array, which are then used to reconstruct an image with resolution comparable to or higher than that of the conventional imaging system. This is achieved by a computational method known as super-resolution reconstruction. Work at the University of Delaware towards this end includes participation in the design and optimization of the optical system along with fabrication of some of the optical elements. Grayscale lithography using a high-energy beam sensitive (HEBS) glass photomask and proportional dry etch pattern transfer are the key techniques enabling the fabrication process. In this paper we will discuss the design of the imaging system while focusing on the fabrication aspects of the project.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Dillon, Elton Marchena, Caihua Chen, David Brady, and Dennis Prather "Microlens fabrication using HEBS glass for compact high-resolution IR imaging system", Proc. SPIE 6327, Nanoengineering: Fabrication, Properties, Optics, and Devices III, 63270B (31 August 2006); https://doi.org/10.1117/12.681222
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Imaging systems

Photomasks

Etching

Glasses

Absorbance

Lithography

Optical components

Back to Top