Paper
28 June 2006 The measurement of profile tolerance for the small focal plane plate of LAMOST
Author Affiliations +
Abstract
One essential technology of the entire project of LAMOST(Large-sky-area multiobjec fiber spectroscopic telescope) is the focal plane plate on which is installed over 4000 fiber units. The telescope receives the light passes through the reflector of MA (the reflecting Schmidt plate) and MB (the spherical mirror), forms focusing image in the focal plane. And through optical fiber the light is introduced to the spectroscope by the fiber units. So the focal plane is the basic of the plane installed 4000 fiber units, and influence the imaging quality of the whole system. In the project of LAMOST, the focal plane plate is a part of sphere which radius is 19880mm and the diameter of it is about 1750mm, but the surface area of the focal plane plate approximate 1/8000 of the whole global. Thereby the measurement of the focal plane plate which profile tolerance low than 40μm to obtain the reliable and accurate results is a difficult problem to deal with. All the installation of the fiber units and mending the focal plane are based on the measurement. We try to use CMM(Coordinate Measurement Machine) to survey the processed Small Focal Plane which diameter is 445mm. And we will carry on the analysis for several kinds of test and the data processing method to compare and optimize, finally determines the actual application plan.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zengxiang Zhou, Chao Zhai, Xiaozheng Xing, and Hongzhuan Hu "The measurement of profile tolerance for the small focal plane plate of LAMOST", Proc. SPIE 6269, Ground-based and Airborne Instrumentation for Astronomy, 62694U (28 June 2006); https://doi.org/10.1117/12.670110
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical spheres

Tolerancing

Telescopes

Spherical lenses

Imaging systems

Optical fibers

Reflector telescopes

RELATED CONTENT

A micro-optical fiber positioner
Proceedings of SPIE (July 10 2018)
Two telescope configurations for China
Proceedings of SPIE (June 01 1994)
The testing scheme for the LAMOST focal plane plate
Proceedings of SPIE (July 11 2008)
A New Class Of All-Reflective Optical Systems
Proceedings of SPIE (May 03 1979)
2-m LAMOST-type telescope for the Antarctic
Proceedings of SPIE (June 23 2006)

Back to Top