Paper
29 June 2006 Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST
Author Affiliations +
Abstract
This paper constructed two protecting methods of diminishing the collision during the opposite movement of the adjoining fiber unit in the LAMOST Positioning System. Auto-positioning mode is applied to every fiber positioning unit of LAMOST Positioning System. The observing region is a circular region with the diameter of 33 mm. To ensure the whole focal plane is covered by the observing region of 4000 fiber units, there must be superposition of observing region of each adjoining fiber units, which induced the collision of adjoining fiber holder in the movement process and resulted in the failing of orientation and mangling of structure. The mode of avoiding the collision comprises two methods. One is hard protected mode, according to this method sensors are installed at each fiber positioning unit, then the motion of the fiber units will be stopped immediately when the adjoining fiber units close to a dangerous distance. The other is soft protected mode, which deliberates every situation of software from the observation programming to the motion path designing for avoiding the collision. This paper expounds the designing and achievement of these two methods mentioned formally.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chao Zhai, Zhikun Zhou, Yi Jin, and Hongzhuan Hu "Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST", Proc. SPIE 6269, Ground-based and Airborne Instrumentation for Astronomy, 626938 (29 June 2006); https://doi.org/10.1117/12.669325
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal detection

Collision avoidance

Structured optical fibers

Control systems

Ceramics

Roads

Computer programming

RELATED CONTENT

On-the-fly assessment of terrain effects on UGV handling
Proceedings of SPIE (September 02 2004)
Fiber micro-vibration readout sensor based on MOEMS
Proceedings of SPIE (January 29 2007)
PyDevCom: a generic device communications application
Proceedings of SPIE (July 14 2008)
ARM-based control system for terry rapier loom
Proceedings of SPIE (January 09 2008)
Review Of E-Beam Electrical Test Techniques
Proceedings of SPIE (September 01 1987)

Back to Top